3.1 Install Preparation
a. Either connects the Mounted Touch Monitor with SCSI port by SCSI cable, or regular monitor with
VGA cable.
b. Please prepare 1 set of external USB CDROM.
c. Connect CDROM to the USB port of right side of system.
d. Turn on the system and enter to CMOS Set Up.
e. Check and change "the Boot Device" to USB CDROM.
f. Enter to boot on procedure.
g. Install OS and Driver step by step.
FES 8000 connect with Mounted Touch Monitor
FES 8000 connect with regular Monitor
Driver Installation
CD-ROM
CD-ROM
8
Chapter 3