System Installation - Acnodes FES93 Series User Manual

3

System Installation

Before disassembling the system enclosure and installing components and modules,
please make sure you have done the following:
It is recommended that only qualified service personnel should install and

service this product to avoid injury or damage to the system.
Please observe all ESD procedures at all times to avoid damaging the

equipment.
Before disassembling your system, please make sure the system has powered

off and all cables are disconnected.
Place the system on a flat and sturdy surface (remove from mounts or out of

server cabinets) before proceeding with the installation/ replacement procedure.
43