Powering On The System; Powering On Using The Power Button - Acnodes FES93 Series User Manual

3.7

Powering On the System

There are four methods to power on the system
Pressing the power button

Via an external non-latched switch

Via an external latched switch

Sending a LAN packet via Ethernet (Wake-on-LAN)

3.7.1

Powering On Using the Power Button

This is the simplest way to turn on your system. The power button on the front panel
is a non-latched switch and behaves as the ATX-mode on/off control. With DC power
connected, pushing the power button will turn on the system and the PWR LED
indicator will light up. Pushing the button when system is on will turn off the system. If
your operating system supports ATX power mode (i.e. Microsoft Windows or Linux),
pushing the power button while the system is in operation will result in a pre-defined
system behavior, such as shutdown or hibernation.
59