3.2.4
2.5" HDD/ SSD Installation
There is a SATA port for users to install a 2.5" HDD/ SSD in the FES93XX
systems.
1. On the I/O module, locate the SATA port (indicated in blue) and the four
support stands (indicated in red).
2. Match the 2.5" HDD/ SSD SATA connector to the SATA port on the module and
gently insert the HDD/ SSD into place.
3. Secure the 2.5" HDD/ SSD with the supplied four flathead screws. The screws
are inserted (indicated in red) from the same side as the I/O connector
(indicated in blue).
4. Once the 2.5" HDD/ SSD is secured, the module is ready to be installed into the
system.
50