Powering On Using Wake-On-Lan - Acnodes FES93 Series User Manual

3.7.4

Powering On Using Wake-on-LAN

Wake-on-LAN (WOL) is a mechanism to wake up a computer system from a S3
(standby), S4 (Hibernate) or S5 (system off with standby power) state via issuing
Subnet Directed Broadcasts (SDB) or a magic packet. The system implements the
Wake-on-LAN function for the GbE port #3 shown below.
To enable WOL function and power on your system, please follow the steps below.
1. Press F2 when the system boots up to enter BIOS.
2. Enter the [Power] menu. And configure the [Wake On LAN] option as
[Enabled]. Please refer to the Wake-on-LAN section.
62