Sata Interface Speed - Acnodes FES93 Series User Manual

4.3

SATA Interface Speed

The system's SATA controller supports three modes of operations, <Gen1>, <Gen2>
and <Gen3>. Gen 1 SATA mode offers bandwidth throughput of up to 150MB/s; Gen
2 SATA mode offers bandwidth throughput of up to 300MB/s; Gen 3 SATA mode
offers bandwidth throughput of up to 600MB/s. For systems with only the mSATA
module installed, Gen 2 is recommended. For systems with the 2.5" SSD, you can
set this option to Gen2/ Gen3 according to SSD's specifications.
To set Chipset SATA mode:
1. Press F2 when the system boots up to enter the BIOS setup utility.
2. Go to [Advanced]  [SATA Configuration].
3. Set the [SATA Interface Speed] option to the desired mode.
4. Once set, press F10 to save setting and exit.
67