Disassembling The System Enclosure - Acnodes FES93 Series User Manual

3.1

Disassembling the System Enclosure

To install necessary components such as DDR3L memory, mSATA and/ or the I/O
module, you need to disassemble the FES93XX system enclosure:
1. To disassemble FES93XX unfasten the three (3) screws shown in the
illustration A and the two (2) screws shown in illustration B, below.
2. Gently slide the L-shaped enclosure open to gain access to internal I/O
connectors.
Illustration A
44
Illustration B