Basic Operation; Switching On The Appliance; Setting A Programme; Adjusting The Programme Set- Tings - Siemens WM16XFH4GB User Manual And Assembly Instructions

Basic operation

Basic operation
You can find out everything you need
Basic operation
to know about operating your appli-
ance here.

Switching on the appliance

Press .
▶
It may take a few seconds for the
appliance to switch on.
Note: The drum is lit up after the
door is opened and closed and once
the programme has started. The light
goes out automatically.

Setting a programme

Set the programme selector to the
1.
required "programme" → Page 29.
If necessary, "adjust the pro-
2.
gramme settings" → Page 43.
Setting additional programmes
Set the Others programme.
1.
Press to call up the sub-
2.
menu for additional programmes.
Select a programme.
3.
Press Main menu to call up the
4.
main menu.
Adjust the programme settings if
5.
required.
Start the programme.
6.
Adjusting the programme set-
tings
Depending on the programme and
programme progress, you can adjust
or activate/deactivate the settings.
Note: Overview of all programme set-
tings:
→ "Buttons", Page 26
Requirement: A programme has
been set.
Adjust the programme settings.
▶
→ "Operating logic", Page 22
The programme settings are not
saved permanently for the pro-
gramme.
Adjusting additional programme
settings
Press Options to call up the sub-
1.
menu for the additional pro-
gramme settings.
www.devicemanuals.eu
Basic operation en
43