Table of Contents
Advertisement
Energy saving mode
If you do not use the appliance for an
extended period, it automatically
switches to energy-saving mode. All
displays go out and Start/Reload
flashes.
Energy-saving mode ends when you
use the appliance again, e.g. if you
open or close the door.
If you do not use the appliance for an
extended period, the appliance
switches off automatically.
Installation and connection
Installation and connec-
tion
You can find out where and how best
Installation and connection
to install your appliance here. You
will also learn how to connect the ap-
pliance to the water and power sup-
ply.
Unpacking the appliance
Note: Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
Installation and connection en
ATTENTION!
Objects remaining in the drum that
are not designed for operation with
the appliance may cause material
damage and damage to the appli-
ance.
Remove these objects, along with
▶
all supplied accessories, from the
drum before starting the appliance.
Remove any packaging and pro-
1.
tective covers completely from the
appliance.
For the environmentally friendly
disposal of the packaging materi-
als, observe the information on the
topic of
→ "Disposing of packaging",
Page 12.
Check the appliance for visible
2.
damage.
Open the door.
3.
→ "Basic operation", Page 43
Remove the accessory from the
4.
drum.
Close the door.
5.
www.devicemanuals.eu
13
Advertisement
Table of Contents
