Table of Contents
Advertisement
en Cleaning and servicing
Take the drain hose out of the
7.
holder.
8.
CAUTION - Risk of scalding!
When you wash at high temperat-
ures, the detergent solution gets
hot.
Do not touch the hot detergent
▶
solution.
To allow the detergent solution to
flow out into the container, remove
the sealing cap.
Firmly press on the sealing cap.
9.
56
Insert the drain hose into the
10.
holder.
Cleaning the drain pump
Note: Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
Requirement: "The drain pump is
empty." → Page 55
Since water may remain in the
1.
drain pump, remove the pump cap
carefully.
The filter insert in the pump
‒
housing may become stuck due
to coarse particles of dirt.
Loosen the dirt and remove the
filter insert.
www.devicemanuals.eu
Advertisement
Table of Contents
