Detergents And Care; Products; Basic Operation; Switching On The Appliance - Siemens WG44A10XZA User Manual And Installation Instructions

en Detergents and care products
Detergents and care products
12 Detergents and care

products

The manufacturer's instructions for
Detergents and care products
use and dosage can be found on the
packaging.
Notes
When using liquid detergents, only
¡
use liquid detergents that are self-
flowing
Do not mix different liquid deter-
¡
gents
Do not mix detergent and fabric
¡
softener
Do not use products that have ex-
¡
pired or are highly congealed
Do not use products containing
¡
solvents, caustic agents or volatile
substances
Do not use dyes regularly as fixing
¡
salt can damage stainless steel
Do not use color-bleaching agents
¡
in the appliance

Basic operation

13 Basic operation
Basic operation
13.1 Switching on the appli-
ance
Requirement: The appliance has
been correctly installed and connec-
ted.
→ "Installation and connection",
Page 11
Turn the programme selector to a
▶
programme.
13.2 Setting a programme
Turn the programme selector and
1.
set the required programme.
→ "Programmes", Page 25
30
If required, adjust the programme
2.
settings.
→ "Adjusting the programme set-
tings", Page 30
13.3 Adjusting the pro-
gramme settings
Requirement: A programme has
been set.
→ "Setting a programme", Page 30
Adjust the programme settings.
▶
→ "Buttons", Page 23
Note: The programme settings are
not saved permanently for the pro-
gramme.
13.4 Loading laundry
Note: To prevent creasing, note the
maximum load for the programmes.
→ "Programmes", Page 25
Requirements
The laundry is prepared and sor-
¡
ted.
→ "Laundry", Page 29
The drum is empty.
¡
Open the door.
1.
Place the laundry in the drum.
2.
Close the door.
3.
Ensure that there is no laundry
trapped in the door.
13.5 Inserting the measuring
aid for liquid detergent
If you order the measuring aid as an
accessory, you must use the measur-
ing aid.
Pull out the detergent drawer.
1.