Table of Contents
Advertisement
Display iiiumination color setting
This is to select the display illumination color.
1.
Press and hold
/
key for over 2 seconds to enter setting menu.
2.
Press
/
key to choose No.22 menu, LCD displays "COL--
ORG".
3.
Turn Main Dial to select the desired color. Available colors are:
ORG-Orange, PUR-Purple, and BLU-Blue.
4.
Press
key to confirm and exit.
Scan resume Time Setup
There are 3 kinds of scan resume conditions.
1.
Press and hold
key for over 2
seconds to enter setting menu.
2.
Press
/
key to choose No.23
menu, LCD displays "SCAN--TO".
3.
Turn Main Dial to select the desired
Scan Resume Time.
TO: Timed Scan, it resumes scanning
after receiving 5 seconds or when the
signal is gone, which ever faster.
CO: Busy Scan, it resumes scanning when the receiving signal is
gone.
SE: Stops scanning when a signal is received.
4.
Press
key to confirm the selection and exit.
LCD dimmer
1.
Press and hold
key for over 2 seconds to enter setting menu.
General Setting
2.
Press
/
key to choose No.24
menu, LCD displays "LAMP--25"
3.
Turn Main Dial to select the desired
LCD brightness; 1 to turn off, 32 to the brightest.
4.
Press
key to confirm and exit.
tone-burst tones
1.
Press and hold
key for over 2 seconds to enter setting menu.
2.
Press
/
key to choose No.25
menu, LCD displays"TB--1750".
3.
Turn Main Dial to select the desired
tone frequency. Available tones are
1000,1450,1750 and 2100Hz.
4.
Press
key to confirm the selection and exit.
Display Mode Setup
There are 3 different dispaly modes: Frequency+Memory mode,
Channel mode&Channel+Name Tag mode.
1.
Press and hold
key for over 2 seconds to enter setting menu.
2.
Press
/
key to choose No.26 menu, LCD displays"DSP—
FR".
3.
Turn Main Dial to select the desired mode.
FR: Frequency+Memory mode.
CH:Channel mode.
NM:Channel+Name Tag mode,if channel
not named, it displays Frequency +
Memory mode.
4.
Press
key to confirm and exit.
8
22
Advertisement
Table of Contents
