LCD displays T icon,it indicates CTCSS encode set in current
channel.
LCD displays T and SQ icon,it indicates CTCSS encode and
decode set in current channel.
LCD displays DCS icon,it indicates DCS encode and decode set
in current channel.
3.
In corresponding icon,press [
CTCSS/DCS encode and decode.
4.
Press
,
, or
to confirm and exit.
Talk Around
By Talk Around function,you can directly communicate with other radios
in your group in case the repeater is not activated or when you are out of
the repeater range. The transceiver will transmit by RX frequency with its
CTCSS/DCS signaling.
1.
In standby,press
,then press
2.
Press [
/
] to select the desired setting .
ON:Enable Talk Around
OFF:Disable Talk Around
3.
Press number key to confirm and exit.
BEEP sound
The prompting tone provides confirmation of entry, error status or
malfunctions of the transceiver. You can enable or disable this function.
1.
In standby, press
, then press
2.
Press [
/
] to turn on/off BEEP prompt.
BEEP—OF :turn off the beep;
BEEP—ON :turn on the beep.
/
] to select the desired
key,LCD displays "TALK--OF".
, LCD displays "BEEP--XX".
Microphone Operation
3.
Press number key to confirm and exit.
LCD Backlight
1.
In standby status, press
XX" .
2.
Press [
/
] to select desired backlight brightness(1-32
levels).
3.
Press number key to confirm and exit.
, then press
LCD displays"LAMP-
9
26