Table of Contents
Advertisement
5 Operation
3.
Use the
and
4.
To disable the high alarm, simultaneously press the
5.
When the desired high alarm threshold (or OFF) is displayed, press the
button to save the value.
The current low threshold or OFF (if the alarm is disabled) is now flashing on
the main display.
6.
To switch from OFF to the numerical display, simultaneously press the
and
buttons.
7.
Use the
and
alarm value cannot exceed the high alarm value.
8.
To disable the low alarm, simultaneously press the
9.
When the desired low alarm threshold (or OFF) is displayed, press the
button to save the value and exit the alarm set mode.
5.10 Locked mode
In Locked mode, the meter ignores all button presses except
The auto power off function, see section 5.1.1 Auto power off, page 11, is dis-
abled in Locked mode.
1.
To enter Locked mode, press and hold the
The
indicator is displayed.
2.
To exit Locked mode, press and hold the
again.
5.11 Streaming measurement data using Bluetooth
5.11.1 General
Some IR cameras from Flir Systems support Bluetooth communication and to
those cameras you can stream measurement data from the meter. The data is
then merged into the result table in the IR image.
#T559822; r.9065/9080; en-US
buttons to adjust the high alarm threshold.
buttons to adjust the low alarm threshold. The low
and
and
buttons.
and
button for 5 seconds.
button for 5 seconds once
buttons.
.
19
Advertisement
Table of Contents
