Table of Contents
Advertisement
4 Description
•
Press and hold the button for 2 seconds to change the unit
setting. For more information, see section 5.7 Selecting meas-
urement units, page 17.
•
When in View data mode, press the button to step through the
datalogger memory locations.
When in View data mode, press the button to step through the
datalogger memory locations.
Press the button to capture and store the current readings. For
more information, see section 5.8 Storing and recalling measure-
ments, page 17.
Press the button to switch the meter on/off.
4.3 Display description
1.
Main display.
2.
Secondary display.
3.
Bar graph (matches the reading on the main display).
4.4 Status icons and indicators
Indicates that METERLiNK® (Bluetooth) communication is ac-
tive, see section 5.11 Streaming measurement data using Blue-
tooth, page 19.
Indicates that the IR sensor and the laser pointer diode are active.
#T559822; r.9065/9080; en-US
8
Advertisement
Table of Contents
