Advertisement
Advertisement
Table of Contents
Related Manuals for FLIR MR59
Summary of Contents for FLIR MR59
- Page 1 Quick Start Ball Probe Moisture Meter with Bluetooth ® Model MR59...
- Page 2 9. To freeze/unfreeze a displayed reading, short press the HOLD button. 10. The MR59 beeps when the moisture reading exceeds the high alarm limit. To set the alarm limit, short press the SET button, and then use the up /down arrows to set the value (press SET again to exit).
- Page 3 METER DESCRIPTION 1. Moisture sensor 2. Backlit LCD 3. Data Hold/MIN-MAX clear 4. Worklight ON/OFF and up arrow button 5. Backlight ON/OFF and down arrow button 6. Power button 7. Alarm SET/Alarm limit button 8. Work light 9. Tripod mount 10.
- Page 4 FUNCTION BUTTONS Long press to power the meter ON/OFF CLEAR Long press to clear MIN/MAX memories HOLD Short press to access/exit Data Hold mode Long press to enable/disable the audible Alarm Short press SET to access/exit the alarm threshold screen (use the arrow buttons to change the threshold value) In Alarm limit mode, increase the moisture alarm threshold In Alarm limit mode, decrease the moisture alarm threshold...
- Page 5 To connect to a remote device running FLIR Tools™, turn on the re- mote device and start the FLIR Tools application. Open Instruments, and search for the MR59 (the MR59 must be ON). Tap to connect to the MR59. When connected to a device running the FLIR Tools mobile app, the MR59 (using the METERLiNK ®...
- Page 6 #NAS100096; r. AB/80574/80853; en-US...
- Page 8 Customer support http://support.flir.com Copyright © 2021, FLIR Systems, Inc. All rights reserved worldwide. Disclaimer Specifications subject to change without further notice. Models and accessories subject to regional market considerations. License procedures may apply. Products described herein may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions.
Need help?
Do you have a question about the MR59 and is the answer not in the manual?
Questions and answers