Table of Contents
Advertisement
The information menu is used to the detect signal of projected image and running state.
Menu operation
Press MENU button on the remote control or
top control to display the screen menu. Press
to select Info., the information menu will
appear as the right picture.
The information below will display in
information menu.
Input
The selected input source is displayed.
H-sync freq .
The horizontal frequency of the input signal is
displayed in KHz or - - - -KHz when no signal is
detected.
V-sync freq .
The vertical frequency of the input signal is
displayed in Hz or - - - - Hz when no signal is
detected.
Lamp status
The setting status of "Lamp control" is
displayed.
Lamp counter
The usage time of the lamp is displayed.
Power management
The setting status of "Power management" is
displayed.
Image mode
The setting status of "Image mode" is
displayed.
Information
info. menu
Info.
Input
1024 x 768, 60Hz
H-sync freq.
V-sync freq.
Lamp status
Lamp counter
Power management
Image mode
Computer 1
48.24 kHz
60.06
Hz
2
H
Ready
5
Min
Standard
53
Advertisement
Table of Contents
