Battery Low Indicator - iHome iBT22A Instruction Manual

Bluetooth wireless dual alarm clock

Hide thumbs Also See for iBT22A:

Table of Contents

Replacing & Installing Clock Backup Batteries

The iBT22A uses 3 AAA batteries (included) for backup to provide continuous alarm operation and clock

settings in the event of a power failure. If the backup batteries have been installed and a power failure

occurs or the AC adaptor is accidentally disconnected, the display backlight will not remain lit, but current

time and alarm time settings will be temporarily maintained. Otherwise, you must reset the time and alarm

settings.

Note: You should replace backup batteries when the Battery Low Indicator appears on the display.

1. Please make sure the AC adaptor is connected. Otherwise all settings may be lost during battery

replacement.

2. Open backup battery compartment door located on the bottom

of the unit.

3. Insert three "AAA" batteries, checking the + and – ends of the

batteries match the diagram inside the compartment. We

recommend to use alkaline battery for longer life. Do not mix

alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium)

batteries.

4. Close the compartment cover.

Note: Make sure you dispose of batteries properly (see your local

regulations).

Battery Low Indicator

The Battery Low Indicator is located at the top left of the display.

When it blinks it is time to replace backup batteries.

Using the

iBT22A

Table of Contents