The Queue Setup Screen - ZyXEL Communications VMG1312-T10C User Manual

9.3 The Queue Setup Screen

Use this screen to configure QoS queue assignment. Click Network Setting > QoS > Queue
Setup to open the screen as shown next.
Figure 80 Network Setting > QoS > Queue Setup
The following table describes the labels in this screen.
Table 40 Network Setting > QoS > Queue Setup
LABEL
Index
Status
Name
Interface
Priority
Weight
Rate Limit (kbps)
Modify
VMG1312-T10C User's Guide
DESCRIPTION
This is the index number of this entry.
This indicates whether the queue is active or not.
A yellow bulb signifies that this queue is active. A gray bulb signifies that this queue is
not active.
This shows the descriptive name of this queue.
This shows the name of the Device's interface through which traffic in this queue
passes.
This shows the priority of this queue.
This shows the weight of this queue.
This shows the maximum transmission rate allowed for traffic on this queue.
Click the Edit icon to edit the queue.
Click the Delete icon to delete an existing queue. Note that subsequent rules move up
by one when you take this action.
Chapter 9 Quality of Service (QoS)
121