Product Hardware Features - TRENDnet TV-IP651W User Manual

TRENDnet User's Guide

Product Hardware Features

Rear Panel View
WPS button
LAN port
Power port

LAN Port – Connect Ethernet cables to your wired network devices.

Power Port – Connect the included power adapter from your camera to an
available power outlet.
Note: Use only the adapter that came with your camera.

Reset Button – Use an item such as a paperclip to push and hold this button for
3 seconds and release to reset your camera to its factory defaults.

WPS (Wi-Fi Protected Setup) – Push and hold this button for 3 seconds to
activate WPS. The button LED is blinking green when WPS is activated.

Antenna – 2dBi detachable antenna
© Copyright 2012 TRENDnet. All Rights Reserved.
Antenna
Reset button
Front Panel View
IR LED
Focus Ring
Privacy button

IR LED – Built-in 4 IR LED for night vision uses. (for TV-IP651WI)

Light Sensor – Detects the light source to turn IR on or off.

Focus Ring – Turn to adjust the focus of the camera.

Microphone – Built-in microphone for audio can be turn on or off.

Privacy button – Press the privacy button to redirect the camera's viewing
position to a downward and obscured view. To return the camera to the
previous viewing position, wait 5 seconds and then press the privacy button
again.

Power - This LED indicator is solid blue when your camera is powered on.
Otherwise if this LED indicator is off, there is no power to your camera.

Link – This LED indicator is blinking orange when there is connection/data to
your camera.
TV-IP651W / TV-IP651WI
Light Sensor
Camera Lens
Power/Link LED
Microphone
2