Installation Location - Vivint Element CT200 Installation Manual

Installation Location

To avoid having to move your wiring to a new location,
mount the thermostat in place of the old thermostat .
• Install the thermostat on an inside wall of an often-used room, about
5 ft. (1.5m) above the floor.
• Do not install where there are unusual heating conditions, such as:
in direct sunlight; near a lamp, radio, television, radiator register,
fireplace; near hot water pipes in the wall; or near a stove on the
other side of a wall .
• Do not locate in unusual cooling conditions, such as: on a wall
separating an unheated room; or in a draft from a stairwell, door, or
window .
• Do not locate in a damp area . This can lead to corrosion that will
shorten the thermostat's life .
• Do not locate where air circulation is poor, such as: a corner, an
alcove, or behind an open door .
• Do not install the thermostat until all construction and painting is
complete .
• This thermostat does not require leveling .
6
Vivint Element CT200 Installation Guide
Getting Started