Vivint Element CT200 Installation Manual page 37

The Settings screen provides access to many features and settings of
the Thermostat . Features you can control on the Settings screen are
ºF / ºC display, humidity targets, display behavior, information about
the Thermostat, and installer settings . The following pages provide
detailed information about each of these settings .
Units
The Thermostat can display either
Fahrenheit or Celsius temperature
units . The Thermostat can display
room temperatures in a range
from 28°F to 99°F (-2°C to 37°C)
with increments of 0 .5° (F or C) .
1 . From the Home screen, press
and hold the SIDE button for
three (3) seconds .
2 . Press DOWN to highlight Units,
then press the SIDE button . The
currently selected option has a
check mark next to it .
3 . Using the UP or DOWN buttons,
select an option, then press the SIDE button to confirm.
Humidity
This screen is only available if
your system includes humidity
controlling equipment .
1 . From the Home screen, press
and hold the SIDE button for
three (3) seconds .
2 . Press DOWN to highlight
Humidity, then press the SIDE
button . The current Humidity
Target Level percentage
displays . Every 10 seconds,
the display shows the target
temperature associated with
the humidity value .
3 . Press UP or DOWN to set a new target humidity percentage, then
press the SIDE button to confirm.
Vivint Element CT200 Operation Guide
Customization
UNITS
Farenheit
Celcius
HUMIDITY
TARGET LVL
45%
TAP SIDE BUTTON
TO GO BACK
37