Vivint Element CT200 Installation Manual page 44

Other Device Information
Low Battery Warning
The Thermostat displays this screen when the batteries are running
low on charge and should be replaced . This screen will only display
once per day the first time the screen wakes.
1 . Press the SIDE button to dismiss this warning .
2 . Turn the thermostat mode to OFF (from heat or cool) .
3 . Replace the batteries .
4 . Turn the thermostat mode back on to HEAT or COOL .
Your settings will be retained and the thermostat will automatically
reconnect to the Z-Wave Network .
Network Disconnected
The Thermostat displays this
screen when it has lost its
connection to the Z-Wave
Network . This screen will only
display once per day the first time
the screen wakes .
1 . Press the SIDE button to
dismiss this warning .
2 . Go to the Home > Installer
> Network > Link menu,
and follow the procedure to
reconnect the Thermostat to
the Z-Wave Network .
Firmware Updating
The Thermostat displays this
screen when it is updating its
firmware.
Wait until the firmware update is
complete (about 15 minutes) and
this screen is no longer displayed
before attempting to use the
Thermostat .
44
Vivint Element CT200 Operation Guide
Customization
NETWORK
DISCONNECTED
OK
Updating