Vivint Element CT200 Installation Manual page 40

Installer: Comfort Cont .
STAGING: Used for multiple stage systems only . Staging is the
number of degrees between the room temperature and
the target temperature at which the next stage in multi-
stage systems will engage to bring the room temperature
back to the target . The default is 2°F . The programmable
range is 2°F to 6°F (1°- 3°C) .
CALIBRATION
1 . From the Home screen, press
and hold the SIDE button for
three (3) seconds .
2 . Press DOWN to highlight
Installer, then press the SIDE
button .
3 . Press DOWN to highlight
Comfort, then press the SIDE
button .
4 . Press DOWN to highlight
Calibration, then press the
SIDE button .The current
temperature offset displays.
5 . Press UP or DOWN to change the value, then press the SIDE
button to confirm.
CYCLING
1 . From the Home screen, press
and hold the SIDE button for
three (3) seconds .
2 . Press DOWN to highlight
Installer, then press the SIDE
button .
3 . Press DOWN to highlight
Comfort, then press the SIDE
button .
4 . Press DOWN to highlight
Cycling, then press the SIDE
button . The current cycling value displays .
5 . Press UP or DOWN to change the value, then press the SIDE
button to confirm.
40
Vivint Element CT200 Operation Guide
Customization
HEAT/COOL
WHENEVER
1.5°
OFF TARGET
CALIBRATION
OFFSET BY
-2°