Vivint Element CT200 Installation Manual page 43

Reset
The Reset menu enables you to restart the Thermostat, as well as to
reset the device to factory defaults .
RESTART
1 . From the Home screen, press
and hold the SIDE button for
three (3) seconds .
2 . Press DOWN to highlight
Installer, then press the SIDE
button .
3 . Press DOWN to highlight Reset,
then press the SIDE button .
4 . Press DOWN to highlight
Restart, then press the SIDE
button .
5. To confirm that you want to
restart the device, press DOWN to highlight Reset, then press the
SIDE button .
The device restarts .
RESET
1 . From the Home screen, press
and hold the SIDE button for three
(3) seconds .
2 . Press DOWN to highlight
Installer, then press the SIDE
button .
3 . Press DOWN to highlight Reset,
then press the SIDE button .
4 . Press DOWN to highlight Reset,
then press the SIDE button .
5. To confirm that you want
to reset the device to factory
defaults, press DOWN to highlight
Reset, then press the SIDE button .
The device resets itself and reboots . You will need to connect the
device to your Z-Wave Network and specify your system's equipment
and settings . See the Installation Guide Setup section .
Vivint Element CT200 Operation Guide
Customization
RESTART
Restart
thermostat
now?
Restart
RESET
Reset to
factory
defaults?
Reset
43