Dvd-Rom Installation (Optional ); Figure 5-8: Install The Rfid Module - IEI Technology AFL2-W19A-H61 Series User Manual

AFL2-W19A/AB-H61
S te p 4: Connect the RFID connector of the RFID USB cable to the RFID connector on
the motherboard (RFID_USB1).
Attach the sticker of the RFID module to the bottom of the panel.
S te p 5:

Figure 5-8: Install the RFID module

S te p 6: Secure the RFID module to the motherboard using two retention screws on
either side.
Use the RFID reader to read a RFID card.
S te p 7:
5.7 DVD-ROM In s ta lla tio n (Op tio n a l)
To install a DVD-ROM, please follow the steps below.
Remove four screws from the DVD-ROM cover. (Figure 5-9).
S te p 1:
P a g e 57