Network Video Recorder User Manual
Figure 5-1 Event Hint Settings
3. Select an exception type.
Figure 5-2 Exceptions Handling
4. Set the linkage actions. Refer to Configure Linkage Actions .
5.2 VCA Event Alarm
The device supports receiving VCA detections sent by connected IP cameras. Enable and configure
VCA detection on the IP camera settings interface first.
Note
• VCA detections must be supported by the connected IP camera.
• Refer to the network camera user manual for detailed VCA detection instructions.
5.2.1 Facial Detection
The facial detection detects the face appearing in the surveillance scene. Linkage actions can be
triggered when a human face is detected.
Steps
1. Go to System → Event → Smart Event .
2. Click Face Detection.
55