Page 1
Distributor of Olimex LTD: Excellent Integrated System Limited Datasheet of LPC-P11C24 - DEV BOARD FOR LPC11C24 CORTEX M0 Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com Excellent Integrated System Limited Excellent Integrated System Limited Stocking Distributor Stocking Distributor Click to view price, real time Inventory, Delivery & Lifecycle Information: Click to view price, real time Inventory, Delivery &...
Page 2
Distributor of Olimex LTD: Excellent Integrated System Limited Datasheet of LPC-P11C24 - DEV BOARD FOR LPC11C24 CORTEX M0 Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com LPC-P11C24 CORTEX-M0 Development board USER’S MANUAL Revision C, March 2013 Designed by OLIMEX Ltd, 2012 All boards produced by Olimex LTD are ROHS compliant...
Page 3
This document is intended only to assist the reader in the use of the product. OLIMEX Ltd. shall not be liable for any loss or damage arising from the use of any information in this document or any error or omission in such information or any incorrect use of the product.
Thank you for choosing the LPC-P11C24 development board from Olimex! This document provides a user’s guide for the Olimex LPC-P11C24 board. As an overview, this chapter gives the scope of this document and lists the board’s features. The document’s organization is then detailed.
Code can be loaded via the RS232-RS232 interface and the bootloader, however it is highly recommended to have a SWD/TRACE programmer at your disposal. Note that OpenOCD OLIMEX programmers + SWD adapter at the moment of writing are supported only in Rowleys Crossworks for ARM.
LPC-P11C24's reset circuit includes R49 (33Ω), R48 (10kΩ), and a RESET button. 5.2 Clocks 12 MHz quartz crystal Q1 is connected to pins 6 and 7 of the LPC11C24 processor. 5.3 Power supply circuit The power supply circuit of LPC-P11C24 allows flexible input supply from 7V to 9V. This means a wider range of power supplies, adapters, converters are applicable.
Not Connected Not Connected 6.5 PWR Jack The power jack used is the typical 2.5mm one used by Olimex in most of our products. You should provide between 7 and 9 volts @ 1A to the board. Pin # Signal Name...
LPC-P11C24 user's manual 9.3 Product support For product support, hardware information and error reports mail to: support@olimex.com. Note that we are primarily a hardware company and our software support is limited. Please consider reading the paragraph below about the warranty of Olimex products.