Table of Contents
Advertisement
Distributor of Olimex LTD: Excellent Integrated System Limited
Datasheet of LPC-P11C24 - DEV BOARD FOR LPC11C24 CORTEX M0
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com
OLIMEX© 2012
6.12.4 SILENT/NORMAL
Silent/Normal jumper alternatively switches the CAN operation mode. Either Silent T or Normal T,
you need CAN enabled.
The default position is jumper open.
6.12.5 5V_DIS
When open VR2(5V) is enabled.
If closed disables VR2(5V).
The default position is open.
6.12.6 CAN_T
When closed CAN terminator (2x62 Ohm) is connected.
When open CAN terminator (2x62 Ohm) is disconnected.
The default position is closed.
6.13 Additional hardware components
The components below are mounted on LPC-P11C24 but are not discussed above. They are listed
here for completeness:
Reset button - used for hardware reset of the board
B1 and WAKE_UP - buttons
LED1 (Green) + LED2 (Yelow) + Power LED (Red)
Page 18 of 26
LPC-P11C24 user's manual
Advertisement
Table of Contents
