Chapter 35: Removing The Palm-Rest Assembly; Prerequisites; Procedure - Dell Inspiron 13 7000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1. Remove the base cover.
2. Remove the battery.
3. Remove the coin-cell battery.
4. Remove the wireless card.
5. Remove the display assembly.
6. Remove the I/O board.
7. Remove the power button with fingerprint
8. Remove the solid-state drive.
9. Remove the heat sink.
10. Remove the fan.
11. Remove the system board.
12. Remove the status-light
13. Remove the touchpad.
14. Remove the keyboard.
Procedure
After performing all the prerequisites, we are left with the palm rest.
Removing the palm-rest assembly
computer. After working inside your computer, follow the instructions in
reader. (if installed)
board.
Removing the palm-rest assembly
35
After
www.dell.com/
63