Post-Requisites - Dell Inspiron 13 7000 Service Manual

10. Open the latch and connect the I/O-board cable to the system board.
11. Adhere the adhesive tape that secures the latch on the I/O-board cable connector.
12. Connect the power-adapter port cable to the system board.
13. Open the latches and connect the display cable and touchscreen-board cable to the system board.
14. Adhere the adhesive tape that cover the display cable and touchscreen-board cable connectors on the system board.

Post-requisites

1. Replace the heat sink.
2. Replace the solid-state drive.
Replacing the system board 47