Chapter 24: Replacing The Solid-State Drive; Procedure; Post-Requisites - Dell Inspiron 13 7000 Service Manual

Hide thumbs Also See for Inspiron 13 7000:
Table of Contents

Advertisement

NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION:
Solid-state drives are fragile. Exercise care when handling the solid-state drive.
Topics:

Procedure

Post-requisites

Procedure
1. Align the notch on the solid-state drive with the tab on the solid-state drive slot. Then slide the solid-state drive into the
solid-state drive slot at an angle.
2. Align the screw hole on the solid-state drive with the screw hole on the keyboard bracket.
3. Replace the screw (M2x3) that secures the solid-state drive to the keyboard bracket.
Post-requisites
Replace the
base
cover.
42
Replacing the solid-state drive
Replacing the solid-state drive
computer. After working inside your computer, follow the instructions in
24
After
www.dell.com/

Advertisement

Table of Contents
loading

Table of Contents