Chapter 10: Replacing The Heat Sink; Procedure; Post-Requisites - Dell Inspiron 13 7000 Service Manual

Hide thumbs Also See for Inspiron 13 7000:
Table of Contents

Advertisement

NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION:
Incorrect alignment of the heat sink can damage the system board and processor.
NOTE:
If either the system board or the heat sink is replaced, use the thermal pad/paste provided in the kit to ensure that
thermal conductivity is achieved.
Topics:

Procedure

Post-requisites

Procedure
1. Align the screw holes on the heat sink with the screw holes on the system board.
2. In sequential order (indicated on the heat-sink), tighten the four captive screws that secure the heat sink to the system
board.
Post-requisites
Replace the
base
cover.
Replacing the heat sink
computer. After working inside your computer, follow the instructions in
10
After
www.dell.com/
Replacing the heat sink
21

Advertisement

Table of Contents
loading

Table of Contents