Chapter 32: Replacing The Power Button With Fingerprint Reader; Procedure - Dell Inspiron 13 7000 Service Manual

Replacing the power button with fingerprint
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Procedure

• Post-requisites
Procedure
1. Place the power button with fingerprint reader into the slot on the palm-rest assembly. Then adhere the power button with
fingerprint reader cable connector to the keyboard bracket.
2. Replace the two screws (M2x2.5) that secure the power button with fingerprint reader to the palm-rest assembly.
3. Open the power button with fingerprint reader cable connector latch and connect the power button with fingerprint reader
cable to the power button with fingerprint reader.
4. Adhere the power button with fingerprint reader cable to the fan.
5. Open the system board connector latch and connect the power button with fingerprint reader cable to the system board.
computer. After working inside your computer, follow the instructions in
Replacing the power button with fingerprint reader
32
reader
After
www.dell.com/
57