NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Align the screw holes on the battery with the screw holes on the palm-rest assembly.
2. Replace the four screws (M2x3) that secure the battery to the palm-rest assembly.
3. Route the speaker cable through the routing guides on the battery.
4. Reconnect the battery cable to the system board..
16
Replacing the battery
Replacing the battery
computer. After working inside your computer, follow the instructions in
6
After
www.dell.com/