Chapter 12: Replacing The Fan; Procedure; Post-Requisites - Dell Inspiron 13 7000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1. Align the screw holes on the fan with the screw holes on the keyboard bracket.
2. Replace the two screws (M2x3) securing the fan to the keyboard bracket.
3. Route the I/O-board cables through the routing guides on the fan.
4. Connect the fan cable to the system board.
Post-requisites
1. Follow the procedure from step 3 to step 5 in
2. Replace the base cover.
computer. After working inside your computer, follow the instructions in
Replacing the power button with fingerprint
Replacing the fan
reader. (if installed)
Replacing the fan
12
After
www.dell.com/
23