Table of Contents
Advertisement
Users can add an MP_CALL MP93 statement after MP_CLOSE as shown in
the following figure. After pressing the Download button, the macro program
defined between MP_CREATE and MP_CLOSE will be stored as MP93, and this
MP93 will be executed immediately since the MP_CALL MP93 is encountered.
Switch back to the Graph window, users can see the motion trajectory
produced by the program. The above example is a square on the XY plane.
ICP DAS
19
ET-M8194H 快速入門指南
Version 2.0, 2012/10/12
Advertisement
Table of Contents
