Table of Contents
Advertisement
3. Set the DIP-switch to "Init", then power up the ET-M8194H.
4. Choose the COM Port, and then click the Get button to read back the IP
configuration.
5. Fill the settings in IP, Mask and Gateway fields, and then click the Set
button to change the IP configuration.
6. Click the Default button and then click the Set button to restore the
default IP configuration.
7. Shut down the ET-M8194H, and set the DIP-switch to "Run".
8. Power up the ET-M8194H.
ICP DAS
6
ET-M8194H 快速入門指南
Version 2.0, 2012/10/12
Advertisement
Table of Contents
