Table of Contents
Advertisement
Method 2 – Setting via Ethernet
Execute the EzMove Utility and connect to ET-M8194H with Ethernet. Start
the "ET-M8194H Setting by Ethernet" dialog. ([Setting] –> [ET-M8194H
Setting] –> [By Ethernet] –> [Network Tab])
Get Setting : Read the current IP configuration from ET-M8194H.
Set : Fill the new settings in IP, Mask and Gateway fields. Click this button to
start IP configuration. The configuration will be completed in 10 seconds,
and the EzMove Utility will re-connect to ET-M814H with updated IP
address.
ICP DAS
7
ET-M8194H 快速入門指南
Version 2.0, 2012/10/12
Advertisement
Table of Contents
