Using The Bsr Mode; Securing; Securing In Bsr1 Mode With The Button "Start/Stop - Bernina Kaffe 770 QE PLUS Manual

BERNINA Stitch Regulator (BSR)

11.7 Using the BSR mode

The BSR function can either be operated via the foot control or via the button «Start/Stop».
Starting via the foot control: The foot control needs to be pressed while quilting. The machine keeps running
in the BSR1 Mode until the foot control is released, even if the fabric isn't moved.
If quilting BSR2 Mode is stopped, the machine sews another stitch depending on the needle position and
stops with needle position up.
Prerequisite:
•
•
> Lower the feed dog.
> Select the desired BSR Mode.
> To lower the presser foot, push the button «Start/Stop» or press the foot control.
> To start the BSR Mode, push the button «Start/Stop» again or press and hold the foot control again.
> Move the fabric to control the speed of the machine in the BSR Mode.
> To stop the BSR Mode, push the button «Start/Stop» again or release the foot control.
> To deactivate the BSR Mode and to quilt without automatic stitch lengths, tap «BSR Mode».
BSR

11.8 Securing

Securing in BSR1 Mode with the button «Start/Stop»
Prerequisite:
•
•
> Lower the feed dog.
> Lower the presser foot.
> Push the button «Needle position Up/Down» 2x.
> Hold the upper and the bobbin thread.
> Push the button «Start/Stop».
> Sew 5 – 6 securing stitches.
> Push the button «Start/Stop».
> Cut the thread.
126
The Slide-on Freearm Extension Table has been fitted.
The knee lifter of the Free Hand System is attached.
– A red light is lit on the BSR Presser Foot.
– The BSR Mode stops and the red light at the presser foot goes off.
1
The BSR Presser Foot is fitted and connected to the machine.
The BSR display opens and a BSR1 Mode is active.
– The bobbin thread is brought up.
– Start the BSR Mode.
– The BSR Mode stops.