Table Of Contents - Analog Devices EVAL-SSM6515 User Manual

User Guide

TABLE OF CONTENTS

Evaluation Kit Contents......................................... 1
Documents Needed...............................................1
General Description...............................................1
Evaluation Board Photograph................................1
Evaluation Board Block Diagram...........................3
Hardware Description............................................ 4
Jumpers and Connectors................................... 4
Installing the SigmaStudio Software......................6
Installing the USBi (EVAL-ADUSB2EBZ)
Drivers.............................................................. 6
Adding the DLL File............................................7
Setting Up SigmaStudio..................................... 8
Setting Up the Evaluation Board......................... 10
Default Switch and Jumper Settings (S/
2
PDIF Input, I C Mode)....................................10
REVISION HISTORY
4/2022-Revision 0: Initial Version
analog.com
Powering Up the EVAL-SSM6515Z..................11
Power............................................................... 11
2
Using I C Control Mode....................................11
Using SigmaStudio with USBi for I
2 2
External I S Input, I
Default Switch and Jumper Settings (PDM
2
Input, I C Mode)............................................. 13
Default Switch and Jumper Settings (S/
PDIF Input, Standalone Mode).......................14
Evaluation Board Schematics and Artwork......... 15
Ordering Information............................................22
Bill of Materials................................................. 22
EVAL-SSM6515
2
C Control.. 11
C Mode............................ 13
Rev. 0 | 2 of 23