Receiving A Voice From Speaker; Talking Handsfree - NEC UNIVERGE SV9300 Series User Manual

RECEIVING A VOICE FROM
SPEAKER
It is possible to change the terminal to "listen-only" during the call
in progress. You can hear the caller's voice from the speaker on
the terminal with putting the handset on the hook.
TO RECEIVING A VOICE FROM
SPEAKER
1.
Call in progress.
2.
Press Speaker key.
Speaker key lamp lights red.
3.
Replace the handset.
You can hear the voice of calling party from the
speaker.
TO RESTART TALKING
1.
Receiving a voice from the speaker.
2.
Lift the handset.
Speaker key lamp goes off.
FEATURE OPERATION

TALKING HANDSFREE

Dialing or answering a call is possible without lifting the handset.
TO SET HANDSFREE
1.
Press Mic key or Soft key (MIC).
Mic key lamp lights red.
TO CANCEL
1.
Press Mic key or Soft key (MIC).
Mic key lamp goes off.
TO MAKE A CALL WITH HANDS FREE
1.
Mic key lamp is going off.
2.
Press Speaker key.
Speaker key lamp lights red.
Line key lamp lights green.
3.
Dial desired number.
4.
The called party answers.

Press Mic key or Soft key (MIC).
Mic key lamp lights red.

Talk toward the mic.
TO ANSWER A CALL WITH HANDS
FREE
1.
The Call Indicator Lamp flashing.
Line key lamp flashes red.
2.
Press Speaker key.
Speaker key lamp lights red.
Line key lamp lights green.
3.
Talk toward the mic.
When you make a call handsfree, please note
the following items.




52
Avoid using in a place where
there is a lot of echo or noise.
The Microphone is located at the
front of the terminal. It should be
no further away than 50 cm.
When talking handsfree, be
aware of the volume level as to
not disturb people close to you.
Talk alternately with the other
party. The voice may be
interrupted if both party talk at
the same time.