Station Speed Dialing; Originating A Voice Call - NEC UNIVERGE SV9300 Series User Manual

STATION SPEED DIALING

This feature allows a terminal user to dial long-digit or frequently-
called numbers by pressing feature key and abbreviated code.
TO REGISTER FOR STATION SPEED
DIALING
The feature is set to the terminal by system data
setting at initial installation. For details, please
contact the system administrator.
1.
Press Feature key.
Feature key lamp lights red.
2.
Press Ridial key.
You will receive a special dial tone.
Feature key lamp flashes red.
Speaker key lamp lights red.
3.
Dial desired abbreviated code.
Example: "09" is entered.
4.
Press "9" that is access code.
You will receive a confirmation tone.
5.
Dial the desired number.
6.
Press Feature key.
Feature key lamp goes off.
Speaker key lamp goes off.
TO MAKE A CALL USING STATION
SPEED DIALING
1.
Press Redial key.
Speaker key lamp lights red.
2.
Dial abbreviated code.
Example: "09" is entered.
3.
The phone number is automatically dialed.
4.
Lift the handset.
Speaker key lamp goes off.
FEATURE OPERATION

ORIGINATING A VOICE CALL

Instead of ringing, this feature informs the
incoming call by voice.
This feature is set by Soft key or feature key. The
feature key is set by system data setting at initial
installation. For details, please contact the system
administrator.
1.
Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red.
Line key lamp lights green.
2.
Dial extension number.
You will receive a ring back tone.
3.
Press Soft key (VOICE) or Voice Call feature key.
4.
Lift the handset and announce an incoming call
by voice to called party.
Speaker key lamp goes off.
5.
Start conversation after called party answered.
"VOICE" is displayed on the LCD of called
party.
50