Schwinn 190 Assembly Manual / Owner's Manual page 14

7. Install the Seat to the Seat Post
NOTICE: Do not loosen the Seat nuts (14b) on the Seat bracket (14a) before sliding the Seat onto the post. Be sure the
Seat is straight and level. Hold the Seat in position and fully tighten both nuts to secure the Seat.
Tighten the adjustment handle (13c) to secure the seat slider.
8. Attach Pedal Straps and Install Pedals
If the threads strip due to improper installation, then the Pedals can disengage from the bike and/or
break while under usage, which can result in serious injury to the user.
Note: The Left Pedal is reverse-threaded. Be sure to attach Pedals on the proper side of the Bike. Orientation is
based from a seated position on the bike. The Left Pedal has an "L", the Right Pedal an "R". Start the Pedals
by hand, and then fully tighten them with the Pedal Wrench. The Pedals must be fully tightened.
14
14
16 (R)
13c
14a
14b
14b
13mm
15 (L)