Table of Contents
Advertisement
5c. Install the Pivot Cover and Media Tray
NOTICE: Do not cut or pinch the cables.
Note: Remove the adhesive backing from the Media Tray.
Slide the tabs into the slots on the Console face
and rotate the Media Tray downward. Press it firmly
and evenly against the Console face to attach the
adhesive surface securely.
6. Install Seat Post and Secure Top Shroud
NOTICE: Move the upper end of the Top Shroud (5) aside to get access to the seat post mount (1b). Pull up the
adjustment lever (13a) and slide the Seat Post into the seat post mount. Gently push down the adjustment
lever and it will pop back into the locked position. Push down on the Seat Post to ensure that the locking
mechanism is fully engaged. Push the seat post bushing (13b) down into the seat post mount and secure
with screws (G). Push the Top Shroud into position over the seat post mount. Be sure the tabs along the
edges of the Top Shroud snap into the Main Assembly.
Do not set the Seat Post position higher than the stop mark (STOP) on the tube. Be sure to keep
5
13
13a
1b
13b
X2
G
12
11
13
13a
13b
13
Advertisement
Table of Contents
