Wlan Card; Removing The Wlan Card - Dell 0HRTG Service Manual

About this task
Steps
1. Align the notch on the memory module with the tab on the memory module slot and slide the memory module firmly into the
slot at an angle.
2. Press the memory module down until the clips secure it.
NOTE: If you do not hear the click, remove the memory module and reinstall it.
Next steps
1. Connect the battery cable.
2. Install the base cover.
3. Install the SD card.
4. Follow the procedure in

WLAN card

Removing the WLAN card

Prerequisites
1. Follow the procedure in
2. Remove the SD card.
3. Remove the base cover.
4. Disconnect the battery
after working inside your
before working inside your
cable.
computer.
computer.
Disassembly and reassembly 29