Steps
1. Align the screw holes on the base cover with the screw holes on the palm-rest assembly and keyboard assembly, and then
snap the base cover into place.
2. Tighten the eight captive screws that secure the base cover to the palm-rest assembly and keyboard assembly.
Next steps
1. Install the
microSD
card.
2. Install the
SIM
card.
3. Follow the procedure in
WLAN card
Removing the WLAN card
Prerequisites
1. Follow the procedure in
2. Enter
service
mode.
3. Remove the
SIM
card.
4. Remove the
microSD
5. Remove the
base
cover.
About this task
The following images indicate the location of the WLAN card and provide a visual representation of the removal procedure.
After working inside your
Before working inside your
card.
computer.
computer.
Removing and installing components
25