Table of Contents
Advertisement
A motorized magnification changer can be used
optionally. The following magnification factors
can be selected:
1x; 1.5x; 1,6x
2x
The selected factor is displayed on the LeicaS-
creen and in the relevant field of the Leica Ap-
plication Suite (LAS), and is taken into account
when calculating the total magnification.
Pressing the left button (117.1) switches be-
tween the possible magnification factors; press-
ing the right button selects the factor 1x.
8.11 Light Sources
Change magnification via
fixed function buttons on stand
Leica Application Suite (LAS) Software
Fig. 117 Front control panel
1
Function buttons for magnification changer
1
1
• Adjust the intensity with the function buttons
(118.4). The INT function buttons are always
assigned to the currently active transmitted
light (TL) or incident light (IL) axis.
• For TL and IL:
The setting can be made in coarse and fine
steps. Pressing both INT (118.2) buttons as the
same time toggles between coarse and fine
adjustment. The light intensity displayed on
the LeicaScreen changes accordingly.
Coarse adjustment:
Fine adjustment:
• The intensity is individually adjusted and
stored for each objective and contrast
method.
• FLUO: The intensity can be adjusted in 5 fixed
levels.
100% / 55% / 30% / 17% / 10%
(FIM=Fluorescence Intensity Manager)
Adjust intensity via
Fixed function buttons on stand
Variable function buttons on stand and
SmartMove
Leica Application Suite (LAS) Software
8.12 Aperture and Field Diaphragm
8. Operation
0-20
0-255
89
Advertisement
Table of Contents
