Related Manuals for Sony LPU-1601
Summary of Contents for Sony LPU-1601
- Page 1 4-283-549-02(1) LED Display Panel Unit Installation Manual for System Integrator Before installing the unit, please read this manual thoroughly and retain it for future reference. LPU-1601/2001 © 2011 Sony Corporation...
-
Page 2: Table Of Contents
Table of Contents Precautions ............3 Supplied Accessories..........3 System Overview ..........4 Specifications ............5 Connection with LPU unit........6 Connecting the Cables.......... 7 Installation Recommendations ......8 Table of Contents... -
Page 3: Precautions
The unit is packed together with the following accessories. to serious injury or even death. Check that nothing is missing from your package. BNC Cable LPU-1601: 1-839-537-11 (Sony) LPU-2001: 1-839-538-11 (Sony) Precautions TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT OPEN THE PANEL ACCESS DOORS WHEN POWER IS ON. -
Page 4: System Overview
System Overview • If the BNC cable length is less than 100 m (328 feet), Canare L-5CFB can be used. • If the BNC cable length is more than 100 m (328 feet), optical fiber cable should be used, with an Optical Media Converter (not supplied) used in between. -
Page 5: Specifications
Design and specifications are subject to change without notice. Note Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT... -
Page 6: Connection With Lpu Unit
64 x 4, Distributer must be used. POWER VIDEO HDMI DVI-D DVI-A INPUT SIGNAL INPUT SELECT ALARM * Status Switcher If status monitoring is required, the Switcher is necessary. Consult a Switcher Sony representative regarding purchase. Connection with LPU unit... -
Page 7: Connecting The Cables
Converter (not supplied) used in-between. input of LPU. * Data transmitting rate: 600 Mbps • The provided cable should be used for the connection between each LPU. • Consult a Sony representative for information about the Switcher unit. DATA DATA DATA... -
Page 8: Installation Recommendations
• Ensure the steel frame design used to fix the LPUs in place does not obstruct the maintenance door at the back of LPU-1601 and LPU-2001 panels, in the case of rear access maintenance arrangement being selected for LPU-2001. - Page 9 Example of power cable distribution diagram L3, L1, N L1, L2, N L2, L3, N L1, L2, N L2, L3, N L3, L1, N Note The above is for reference only. Actual power distribution should be designed with consideration of local supply law and 3 phases (L1, L2, L3 phase, Neutral) balancing.
- Page 10 Example of steel frame design (LPU-1601) Units : mm (feet) Detail A (Connection Details) Bracket for Fixing Panel LED Panel Vertical Structural Member 762 (2.5) Space for Maintenance : - 800 (2.62) 10,160 (33.33) (640 pixels) Detail A 7,620 (25)
- Page 11 External dimension diagram (LPU-1601) Units : mm (inches) 264.5 (10 969.2 (38 1,016 (40) External dimension diagram (LPU-2001) Units : mm (inches) 1,280 (50 228.5 (9) 1,199 (47 178.5 1,233 (48 Installation Recommendations...
- Page 12 Printed in China...