USER'S MANUAL
MT HORIZONTAL MIXER WAGON
4.5. FILTERS
Hydraulic Oil Filter Check
Periodically check the clogging of the return filter (R) of the hydraulic oil, using the indicator gauge (M) located
in the hydraulic oil tank. If the pressure gauge indicates a pressure of 0.8 Bar, replace the filter. This operation
must be performed by qualified personnel.
Figure 4.10: Hydraulic Oil Return Filter
4.6. WHEELS AND TIRES
Figure 4.11: Tires
If tires are under inflated, their internal structure can be damaged, and provoke premature deterioration.
If tires are over inflated, wheels bounce on hard ground, causing loss of tractor direction and wear.
Page 57